View HE83149_4121234.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
A. HE83149 Introduction
HE83149 is a member of 8-bit Micro-controller series developed by King Billion Electronics Ltd. Users can choose any one of combination among 1024 dots LCD Driver + 8 Bit I/O Port...768 dots LCD Driver + 24 Bit I/O Portetc. The 7-bit current-type D/A converter and PWM device provide the complete speech output mechanism. The 256K bytes ROM size can be used in the storage of speechgraphictext etc.. It can be applicable to the medium systems such as Small-Scale Dictionary, Data Bank, Pocket Dialer, and Educational Toy etc. The instruction sets of HE80000 series are quite easy to learn and simple to use. Only about thirty instructions with four-type addressing mode are provided. Most of instructions take only 3 oscillator clocks (machine cycles). The performance of HE83750S is enough for most of battery operation system.
B. HE83149 Feature
Operation Voltage: System Clock: Clock Source: Internal ROM: Internal RAM Dual Clock System: Operation Mode: 2.4V - 5.5V 4MHz ~ 8MHz Internal/External Fast clock, Internal/External slow clock 256K Bytes(64K Program ROM+192K Data ROM) 512 Bytes Normal (Fast) clock: 32.768K ~ 8MHz Slow clock: 32.768 KHz DUALFASTSLOWIDLESLEEP Mode.
8~24 bit Bi-directional I/O port. Mask Option can select PUSH-PULL or OPEN DRAIN output mode for each I/O pin. 8 of them are shared with LCD segment pins. 1024~768 dots LCD driver (AB TYPE selectable). One 7-bit current-type DAC output. PWM device. Two external interrupts and three internal timer interrupts. Two 16-bit timers and one Time-Base timer. Instruction set 32 instructions, 4 addressing mode. 9-bit DATA POINTER for RAM and 18-bit TABLE POINTER for ROM.
1
V1.0E
KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
C. Pin Description
Pin # 92 91 Pin name I/O Function Description FXI, FXO Mask Option setting: External fast clock MO_FCK/SCKN= 00 : Slow Clock only input/output pins are used B, to connect crystal or RC to 01 : Illegal O generate the 32.768KHz ~ 10Dual Clock 8MHz system clock. 11Fast Clock only MO_FOSCE= 0Internal fast clock 1External fast clock External slow clock MO_FXTAL= 0R,C OSC. for Fast Clock input/output pins used to 1Crystal OSC. for Fast Clock connect the 32.768KHz MO_SXTAL= 0R,C OSC. for 32.768K Clock crystal to generate slow 1Crystal OSC. for 32.768K Clock. clock for system operation I, (slow mode), LCD display Use OP1 and OP2 to switch among different operation O or timer 1 clock source. mode (NORMAL, SLOW, IDEL and SLEEP). In Dual Clock mode, the main system clock is still the Fast Clock. The 32768 Hz clock is for LCD and Timer 1 only. Active low and level trigger reset signal. User can also set the mask option MO_PORE=1 to enable the build-in Power-on reset circuit besides using the reset pin. System reset signal RSTP_N I Watch Dog Timer can also be enabled/disabled by the mask option, MO_WDTE = 0Disable Watch Dog Timer = 1Enable Watch Dog Timer
95 94 SXI, SXO
90
93
TSTP_P
I
IC Test Pin Bi-directional I/O port D. PRTD [7:2] also used as wake-up pin, and PRTD [7:6] also used as external interrupt pin.
Please bond this pin to ground by a 0 ohm resistor to let it accessible when it's necessary for some testing.
Mask options setting: MO_DPP [7:0] = 1Push-pull output. 97.. PRTD[7:0] = 0Open-drain output. 104 B Output must be "1" before reading whenever uses them as input (Non tri-state structure). The pin functions are determined by the mask option MO_LIO15[7:0] MO_LIO15 [7:0] = 1LCD Pin. = 0I/O Pin. 5.. PRT15[7:0]/ When they are selected as I/O pins, the output driving 8-pin bi-directional I/O port 12 SEG[63:56] type can be set by mask option. that is shared with LCD B/O MO_15PP [7:0] = 1Push-pull. segment pin. = 0Open-drain. Output must be "1" before reading whenever uses them as input (Non tri-state structure). The pin functions are determined by the mask option MO_LIO14[7:0] 13... PRT14[7:0]/ MO_LIO14 [7:0] = 1LCD Pin. 20 SEG[55:48] 8-pin bi-directional I/O port B/O that is shared with LCD = 0I/O Pin.
2
V1.0E
KING BILLION ELECTRONICS CO., LTD
Pin # Pin name I/O Function segment pin. Description
HE83149
HE80000 SERIES
When they are selected as I/O pins, the output driving type can be set by mask option. MO_14PP [7:0] = 1Push-pull. = 0Open-drain. Output must be "1" before reading whenever uses them as input (Non tri-state structure). LCD Data filled from F0H, please refer the LCD RAM map. Add one 0.1 F capacitor between LC1 and LC2. Please refer the application circuit. LV3< 9 Volts. Please refer the application circuit. Please refer the application circuit. Please refer the application circuit. Set the bit2(PWM=1) of VOC register and bit0 of PWMC register to turn on PWM Set the bit0(OP=0) and bit1(DA=1) of VOC register to turn on VO Add a 0.1 F capacitor as by-pass capacitor between VDD and GND.
4..1 110.. COM[15:0] 107 69..76 21.. 68 SEG[47:0] 78 LC2 77 LC1 81 L V3 80 L V2 79 L V1 82..86 LR[4..0] 87 L VG 105 106 89 96 88 PWMP PWMN VO VDD GND
O O B B B B B B I O O O P P
LCD COM Output LCD SEG Output Charge Pump Switch 1 Charge Pump Switch 2 Charge Pump V3 Charge Pump V2 Charge Pump V1 LCD Resister level 4 ~ 1 LCD Virtual Ground The PWM positive output can drive speaker or buzzer directly. The PWM positive output can drive speaker or buzzer directly. Voice output. Positive Power Input Power Ground Input
D. LCD RAM Map
Page 0 COM0 COM1 COM2 : : COM13 COM14 COM15 SEG [7:0] 80H 81H 82H : : 8DH 8EH 8FH SEG [15:8] 90H 91H 92H : : 9DH 9EH 9FH SEG [23:16] A0H A1H A2H : : ADH AEH AFH SEG [31:24] B0H B1H B2H : : BDH BEH BFH SEG [39:32] C0H C1H C2H : : CDH CEH CFH SEG [47:40] D0H D1H D2H : : DDH DEH DFH SEG [55:48] E0H E1H E2H : : EDH EEH EFH SEG [63:56] F0H F1H F2H : : FDH FEH FFH
3
V1.0E
KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
E. Pin Diagram
C O M [11] C O M [10] CC OO MM [9] [8] P W M N P W M P P P P P P P P P RRRRRRRR T T T T T T T T DDDDDDDD [0] [1] [2] [3] [4] [5] [6] [7] T S T P | P R S T P | N
V D D
S X I
S X O
F X I
F X O
V O
G N D
L V G
L R 0
L R 1
L R 2
L R 3
COM[12] COM[13] COM[14] COM[15] PRT15[7] PRT15[6] PRT15[5] PRT15[4] PRT15[3] PRT15[2] PRT15[1] PRT15[0] PRT14[7] PRT14[6] PRT14[5] PRT14[4] PRT14[3] PRT14[2] PRT14[1] PRT14[0] SEG[47] SEG[46] SEG[45] SEG[44] SEG[43] SEG[42] SEG[41]
LR4 LV3 LV2 LV1 LC2 LC1 COM[0] COM[1] COM[2] COM[3] COM[4] COM[5]
Die Size: 3460 m * 3650 m Substrate connect with GND
COM[6] COM[7] SEG[0] SEG[1] SEG[2] SEG[3] SEG[4] SEG[5] SEG[6] SEG[7] SEG[8] SEG[9] SEG[10]
Product name
SEG[11] SEG[12]
S S S S S S S S S S S S S S S S S S S S S S S S S S S S E E E E E E E E E E E E E E E E E E E E E E E E E E E E GGGGGGGGGGGGGGGGGGGGGGGGGGGG [40] [39] [38] [37] [36] [35] [34] [33] [32] [31] [30] [29] [28] [27] [26] [25] [24] [23] [22] [21] [20] [19] [18] [17] [16] [15] [14] [13]
4
V1.0E
KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
F. Bonding Pad Location
PIN Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PIN Name COM[12] COM[13] COM[14] COM[15] PRT15[7] PRT15[6] PRT15[5] PRT15[4] PRT15[3] PRT15[2] PRT15[1] PRT15[0] PRT14[7] PRT14[6] PRT14[5] PRT14[4] PRT14[3] PRT14[2] PRT14[1] PRT14[0] SEG[47] SEG[46] SEG[45] SEG[44] SEG[43] SEG[42] SEG[41] SEG[40] SEG[39] SEG[38] SEG[37] SEG[36] SEG[35] SEG[34] SEG[33] SEG[32] SEG[31] X Coordinate X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1657.05 X= -1559.10 X= -1443.60 X= -1328.10 X= -1212.60 X= -1097.10 X= -981.60 X= -866.10 X= -750.60 X= -635.10 X= -519.60 Y PIN Coordinate Number Y= 1500.75 Y= 1385.25 Y= 1269.75 Y= 1154.25 Y= 1038.75 Y= 923.25 Y= 807.75 Y= 692.25 Y= 576.75 Y= 461.25 Y= 345.75 Y= 230.25 Y= 114.75 Y= -0.75 Y= -116.25 Y= -231.75 Y= -347.25 Y= -462.75 Y= -578.25 Y= -693.75 Y= -809.25 Y= -924.75 Y= -1040.25 Y= -1155.75 Y= -1271.25 Y= -1386.75 Y= -1502.25 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 5 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 PIN Name SEG[12] SEG[11] SEG[10] SEG[9] SEG[8] SEG[7] SEG[6] SEG[5] SEG[4] SEG[3] SEG[2] SEG[1] SEG[0] COM[7] COM[6] COM[5] COM[4] COM[3] COM[2] COM[1] COM[0] LC1 LC2 LV1 LV2 LV3 LR4 LR3 LR2 LR1 LR0 LVG GND VO RSTP_N FXO FXI X Coordinate X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1656.70 1599.95 1484.45 1368.95 1253.45 1137.95 1022.45 906.95 791.45 675.95 560.45 Y Coordinate Y= -1502.25 Y= -1386.75 Y= -1271.25 Y= -1155.75 Y= -1040.25 Y= -924.75 Y= -809.25 Y= -693.75 Y= -578.25 Y= -462.75 Y= -347.25 Y= -231.75 Y= -116.25 Y= -0.75 Y= 114.75 Y= 230.25 Y= 345.75 Y= 461.25 Y= 576.75 Y= 692.25 Y= 807.75 Y= 923.25 Y= 1038.75 Y= 1154.25 Y= 1269.75 Y= 1385.25 Y= 1500.75 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 Y= 1797.10 V1.0E
KING BILLION ELECTRONICS CO., LTD 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 SEG[30] SEG[29] SEG[28] SEG[27] SEG[26] SEG[25] SEG[24] SEG[23] SEG[22] SEG[21] SEG[20] SEG[19] SEG[18] SEG[17] SEG[16] SEG[15] SEG[14] SEG[13] X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= X= -404.10 -288.60 -173.10 -57.60 57.90 173.40 288.90 404.40 519.90 635.40 750.90 866.40 981.90 1097.40 1212.90 1328.40 1443.90 1559.40 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 Y= -1710.30 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 TSTP_P SXO SXI VDD PRTD[7] PRTD[6] PRTD[5] PRTD[4] PRTD[3] PRTD[2] PRTD[1] PRTD[0] PWMP PWMN COM[8] COM[9] COM[10] COM[11]
HE83149
HE80000 SERIES Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= Y= 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10 1797.10
X= 444.95 X= 329.45 X= 213.95 X= 98.45 X= -17.05 X= -132.55 X= -248.05 X= -363.55 X= -479.05 X= -594.55 X= -710.05 X= -825.55 X= -965.30 X= -1128.65 X= -1267.75 X= -1383.25 X= -1498.75 X= -1614.25
G. DC/AC Characteristics
Absolute Maximum Rating
Item Supply Voltage Input Voltage Output Voltage Operating Temperature Storage Temperature Sym. Rating Vdd -0.5V ~ 8V Vin -0.5V ~ Vdd+0.5V Vo -0.5V ~ Vdd+0.5V Top 00C ~ 700C Tst -500C ~ 1000C Condition
Recommended Operating Conditions
Item Supply Voltage Input Voltage Operating Frequency Operating Temperature Storage Temperature Sym. Rating Vdd 2.2V ~ 5.5V Vih 0.9 Vdd ~ Vdd Vil 0.0V ~ 0.1Vdd Fmax 8MHz 4MHz Top 00C ~ 700C Tst -500C ~ 1000C Condition
Vdd =5.0V Vdd =2.2V
6
V1.0E
KING BILLION ELECTRONICS CO., LTD Testing Condition: TEMP=25, VDD=3V+/-10%, GND=0V
P ARAMETER IFast ISlow IIdle NORMAL Mode Current SLOW Mode Current IDLE Mode Current System System System CONDITION 2M ext. R/C 32.768K X'tal LCD Disable 32.769K X'tal LCD Disable LCD Enable, LCD option=300Kohm Voltage-doubler OFF LCD Enable, LCD option=30Kohm, Voltage-doubler ON VDD=3V; Voh=2V VDD=3V; VoL=1V VDD=3V;VO=0~2V,Data=7F 12 33 2.5 0.8 VDD
HE83149
HE80000 SERIES
MIN TYP MAX UNIT 0.75 10 6 1 20 10 mA A A
12
20 A
ILCD
Extra Current if LCD ON
System
100
120 1 A mA mA mA V V
ISleep IoHPWM IoLPWM IoVO ViH ViL Vhys IoH IoL_1 IiL_1 IiL_2
Sleep Mode Current PWM Output Drive Current PWM Output Sink Current DAC Output Current Input High Voltage Input Low Voltage
System PWMP, PWMN*2 PWMP, PWMN*2 VO I/O pins I/O pins
15 40 3
0.2 VDD Threshold=2/3VDD(input from low to high) Threshold=1/3VDD(input from high to low) VoL=2.0V 50 VoL=0.4V 1.0 ViL=GND, pull high Internally ViL=GND, if pull high Internally by user 1/3 VDD
Input Hysteresis Width
I/O, RSTP_N I/O pull-high*1 I/O pull-low*1 RSTP_N I/O
V
Output Drive Current Output Sink Current Input Low Current Input Low Current
20 100
A mA A A
Note:
*1: Drive Current Spec. for Push-Pull I/O port only Sink Current Spec. for both Push-Pull and Open-Drain I/O port. *2: This Spec. base on one driver only. There are five build-in driver, multiply the number of driver he used to one driver current to amount of current.( IoHPWMIoLPWM * N; N=0,1,2,3,4,5) so get user the just total
7
V1.0E
KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
H.
Application Circuit
Triple Charge Pump is selected LCD Max. Voltage=LV3=3/2*VDD VDD LV1 C8 0.1uF LV2 LV2 C7 0.1uF LV1 Floating Triple Charge Pump is selected LCD Max. Voltage=LV3=VDD VDD LV3 LV1
Triple Charge Pump is selected LCD Max. Voltage=LV3=3*VDD VDD
C9 0.1uF LV3 LC1
C9 0.1uF LV3 LC1 LC2
Floating
LV2 LC1
0.1uF
C6
0.1uF LC2
C6
No Capacitor LC2
No External Parts is necessary if user adopt Internal Fast RC Clock External Fast Clock: Crystal osc.
FXI 2MHZ FXO 20P
VDD VDD R1 50K BATTERY1 FXI FXO SXI RSTP_N C3 0.1uF SW1 RESET GND LC1 LC2 LV1 LV2 LV3 LC1 LC2 LV1 LV2 COM[15:0] SEG[47:0] PRT15[7:0]/SEG[63:56] PRT14[7:0]/SEG[55:48] SXO PRTD[7:0] FXI FXO SXI SXO
3V
C1
C2
0.1uF 100uF
20P
External Fast Clock: RC osc.
VDD
LCD PANEL
FXI
R > 8.2 KOhm C: Please Ref . AN016
C1 0.1uF C2 0.1uF C3 0.1uF C4 0.1uF C5 0.1uF
LV3 < 9 Volt LR4 LR3 PWMP LR2 LR1 LR0 LVG PWMN
1/5 BAIS CONFIGURATION
External Slow Clock: Crystal osc. Buzzer or Speaker Circuit
SXI VDD SP1 SXO SPEAKER 32.768K 20P 20P
VO TSTP_P
?K Ohm VR1
Passive Bias & Q1 NPN Filter Circuit Please Refer AN022 for Speech Output Circuit
External Slow Clock: RC osc.
SXI R: Please ref . AN016
HE83148 SXO
8
V1.0E
KING BILLION ELECTRONICS CO., LTD
HE83149
HE80000 SERIES
I. Important Note
1. Please always take in mind that ICE is different from IC which is your target body. ICE is the whole set of HE80000 series IC, but each IC is a subset of ICE. Never use any hardware resource that your target IC didn't have these resources, especially RAM and register. KBIDS and compiler cannot prevent user to use some hardware resources that don't exist in your target IC. Please check the following table and refer to the abbreviation in HE80000 user's manual. I.F.C. E.S.C. I.P.R PROM DROM
64KB -- --
TP TP+1 RAM
512B
PP
3-bit
DP
8-bit 16*64
I/O
8~24
DTMF WDT
--
192KB 18-bit
Timer
T1,T2,TB
VO DAO OP PWM
LCD
1024~768
Type
I
COM*SEG
Bias
1/5
2. To access any address larger than 64KB, users must update TPP first, TPH, and then TPL. Only follow this order, the pre-charge circuit of ROM will work correctly. 5us waiting is necessary before LDV instruction is executed since Data ROM is a low speed ROM. Users can not emulate this accessing process in ICE. So 5us delay should be added by firmware. 3. LCD driving circuit must be turn off before IC goes into sleep mode. 4. Please bonds the TSTP_P, RSTP_N and PRTD [7:0] with test points on PCB (can be soldered and probed) as you can, then some testing can be performed on PCB if necessary. The TSTP_P is suggested to connect to ground by a 0 ohm resistor. The following figure is an example (Testing point with through hole).
5. 6. LV3 must be lower than 9.0 Volt. Otherwise IC may be breakdown.
J. Updated Record
Version Date Section Original Content New Content
9
V1.0E

▲Up To Search▲

Price & Availability of HE83149

	To Download HE83149 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .